S 1.2 & S2 LEDs - Small, powerful & wear-free

S1.2 LED
Technical Data
Weight: 3g
Operating voltage type: 12 VDC
Protection class: III IP00, 32x15x9 (mm)
Connections:
SUITABILITY
The modules are particularly suitable for pick-by-light equipment of large department stores with a high number of storage locations. Nevertheless, all our pick-by-light solutions can be effectively implemented with the S1.2 series.

S2 LED
The S2 LED modules not only have a three-digit quantity display – the wear-free infrared sensor can be used to confirm the pick or put process perfectly. One touch on the LED and the operation is confirmed without having to carry another MDE device.
TECHNICAL DATA
3-digit 7-segment display
Weight: 7g
Operating voltage type: 12-24 VDC
Protection class: III IP00, 65x15x9 (mm)
Connections: VCC, SDA, SCL, GND
SUITABILITY
Any type of picking or putting operation, as well as an assistant guide at an assembly workstation or packing table. Optimally, the modules can be used in single-step picking – without having to carry another handheld device.
ACCESSORIES REQUIRED FOR S1.2 AND S2

The following accessories are required to use our LED modules:
+ S1.2/S2 connection cable – available in different lengths, all connection cables are compatible for both module series.
+ PVC cable duct consisting of a lower part plus translucent duct cover – available in different lengths, can be glued or screwed in place
+ ix.net control module – indispensable for controlling the LED modules